LED Spectrometer and Integrating Sphere Specifications

Spectral Range	250 to 1050 nm
Stray Light Rejection	0.1%
Resolution	1.4 nm (with 25 micron slit installed)
Radiometric Accuracy	400 - 1050 nm: ±9.5% 250 - 400 nm: ±10.0%
Sensitivity	40 photons per count at 600 nm
Focal Length	75 mm
Dynamic Dark Correction	Yes, electronic DSP (Dark current from the first 30 pixels of the CCD is measured and dynamically subtracted from the overall signal)
Temperature Operating Range	15°C - 40°C
CCD Array	Sony ILX554B
Non-Linearity Calibration	Yes
System Includes	Wide band Spectroradiometer SpectriLight Software Carrying Case FFO600SC 1 meter long fiber W2 cosine correcting receptor OCAL/N/VS950 calibration
Integrating Sphere Dimensions	10" (250 mm) dia. Internally baffled to eliminate direct detector exposure and first-bounce measurements; 3 orthogonal ports:- 37.6 mm (1.5") diameter entrance ports with port adapter mounting rings (42 mm diameter)
Sphere Includes	2 port plugs and one A250 port plug/lamp adapter equipped with two feed-thru pins to allow power to the light source while blocking outside leakage. Calibrated standard transfer lamp with output in millicandela. Built-in standard transfer lamp and 5VDC power can be used to accurately adjust calibration for any application.
Sphere Coating	# 6080 White Reflecting Coating produces a stable, efficient and highly diffuse reflectance over a broad wavelength.