105/106 Leveling Wire Harness & Meter
Leveling Wire Harness
The Leveling Fanout Adapters provide the capability to equalize or align the continuity-loop resistance of each test channel on the 105/106 Event Detectors. These adapters serve the same function as the 105/106 Fanout Adapters, but include the individual channel resistance adjustments. For example, if the largest channel loop resistance is 3.5 ohms, a channel with a 1.2 ohm resistance can be adjusted to 3.5 ohms by adding 2.3 ohms using the Leveling Fanout Adapter.
Features
- Robust harnesses to provide reliable test-service
- Connector and screw terminals for easy attachment to test boards
- Convenient channel numbering sequence of test connections
- Test wiring can be easily swapped using separable connectors
- 16 channels per Adapter Board
This connection adapter should not be located inside a temperature-cycle-chamber or attached to a vibration / drop stage. Contact the Analysis Tech engineering staff for more details.
Leveling Meter
The Leveling Meter must be used to adjust your Leveling Fanout Adapter Boards. A single Leveling Meter allows you to adjust an unlimited number of Fanout Adapter Boards.
Ordering Information: Each adapter board includes 2 screw-terminal mating connectors and one shielded crimp-on ribbon cable connector for connecting to existing Event Detector ribbon cables. Wire Harness part number: WH-LEVEL-105/106
Leveling Meter part number: MTR-LEVEL-105/106