105/106 Event Detector Wiring Harness Adapter
This connector adapter, which is included with each 105 and 106 series Event Detector, provides a screw-terminal and separable connector combination for connecting test samples to the 105 and 106 series Event Detectors. Each bank of 16 channels is conveniently split into 2 separable connectors, each carrying 8 channels. The 8 individual channel wires from the test sample are fastened to the separable connector body with screw-clamping connections. In essence, the 16 channel ribbon cable is split into 2 groups of 8 channels, each with it's own independent connector. The 37D sub-miniature connector on this adapter is identical to the connector used on the front panel of the 105 and 106 series Event Detectors.
Our leveling wire harness adapter is an alternate version of this wiring harness that allows users to set uniform resistance across all channels.
The included 105/106 wire harness adapter (shown above) can be upgraded to the high-temperature cable option (shown below) upon request. The high temperature cables can withstand temperatures of up to 200C. (Note: Only the cables are rated for high temperature. The PWB must be kept outside of the temperature cycling chamber.)
Features
- Robust harnesses to provide reliable test-service
- Connector and screw terminals for easy attachment to test boards
- Convenient channel numbering sequence of test connections
- Test wiring can be easily swapped using separable connectors
Each connector carrying 8 channels also includes one ground wire that can be used for the ground return although addition grounding is still required as part of the normal Event Detector setup procedure. This connection adapter should not be located inside a temperature-cycle-chamber or attached to a vibration / drop stage. Contact the Analysis Tech engineering staff for more details.
Ordering Information: Each standard board includes 2 screw-terminal mating connectors and one shielded crimp-on ribbon cable connector for connecting to existing Event Detector ribbon cables. Order part number: WH-37-2x9-105/106
Each high-temperature cable board includes 16 high temperature and shielded coax cables, and one shielded crimp-on ribbon cable connector for connecting to existing Event Detector ribbon cables. Each eight foot high temp cable has a single ended mating connector. Order part number: WH-105/106-HiTemp