STD Wiring Harness Adapter
This connector adapter provides a screw-terminal and separable connector combination for connecting test samples to the STD Event Detectors. Each bank of 32 channels is conveniently split into 4 separable connectors, each carrying 8 channels. The 8 individual channel wires from the test sample are fastened to the separable connector body with screw-clamping connections. In essence, the 32 channel ribbon cable is split into 4 groups of 8 channels, each with it's own independent connector. The 37D subminiature connector on this adapter is identical to the connector used on the front panel of the STD Event Detector.
Features
- Robust harnesses to provide reliable test-service
- Connector and screw terminals for easy attachment to test boards
- Convenient channel numbering sequence of test connections
- Test wiring can be easily swapped using separable connectors
Each connector carrying 8 channels also includes one ground wire that can be used for the ground return although addition grounding is still required as part of the normal Event Detector setup procedure. This connection adapter should not be located inside a temperature-cycle-chamber or attached to a vibration / drop stage. Contact the Analysis Tech engineering staff for more details.
Ordering Information: Each board includes 4 screw-terminal mating connectors and one crimp-on ribbon cable connector for connecting to existing Event Detector ribbon cables. Order part number: WH-37-4x9-STD