CTE Tester Calibration Package:
Calibration Instruments & Reference Sample Set
CTE Tester instrument calibrations can be conveniently performed "in-lab" without ever moving the unit. The TC Calibrator accessory is provided for this purpose. The entire bi-annual calibration of the CTE Tester is a user-friendly, 10 minute procedure handled by WinCTE Software. During calibration, the TC Calibrator provides automatic calibration of the internal CTE test vial temperature control in conjunction with WinCTE cal-routines and a USB communication link. WinCTE also provides complete help files and on-screen instructions for all aspects of instrument calibration. The TC Calibrator should be sent for yearly calibration and re-certification by Analysis Tech.
The Reference Sample Set provides a collection of prepared, pre-tested reference samples spanning the appropriate range of thermal expansions. These reference samples can be tested at any time to confirm the accuracy and consistency of the CTE Tester operation. Reference samples are tagged with the sample's expansion characteristics, and sample length. The included documentation provides certified traceability to national laboratory standards. Reference standard samples provide an excellent and convenient means to maintain highest verification and confidence in the CTE Test results.
Ordering Information
Order numbers: CTE-CALPACK
Note: The CTE Calibration Pack is included with the CTE Accessory Pack